Posts Tagged ‘wheeling’

Charleau Gap 1/8/2011

Tuesday, July 10th, 2012

Here are some images of a 4×4 trip me and some friends did in January 2011. We ran the Charleau Gap Trail.

Fixer-Upper Run 11/15/09

Thursday, November 19th, 2009

Here are pictures from our run to Chimney Rock to go fix a friends f350 that bent it’s drag link on one of the obstacles there and couldn’t make a right turn. We ended up packing a welder, generator, cutoff wheels, grinder, hand tools, and pipe (for sleeving the bent drag link so it could […]

Chimney Rock 9/6/09

Sunday, September 6th, 2009

The trail to chimney rock is easy and can be traversed by 2wd vehicles. The rocks themselves are much more challenging than the trail in and has many obstacles that require 4wd.

Chivo Falls Run 4/18/09

Saturday, April 18th, 2009

Chivo falls is a moderate trail system with obstacles and routes ranging from easy/moderate to moderate/challenging.

GM 14 bolt swap into a 1/2 ton chassis

Wednesday, April 8th, 2009

This is a common swap done by many in the 4×4 world to beef up there 1/2 ton or c-clip axles. Other than the larger and beefier ring and pinion the major benefit of this swap is the full floating axles. The difference is that when a c-clip axle breaks the axle will slide out […]

We Rock Hits Tucson

Sunday, April 5th, 2009

Here are some pictures I took at the WE Rock competitions in Tucson, Az. About 2 Sec Later:

1984 M1009 CUCV (aka Military Blazer)

Monday, December 8th, 2008

Here are some pictures of my “new” Blazer. It is an ’84 M1009 CUCV which is basically a Chevrolet K5 Blazer modified for military use. Some of the changes are 3/4 ton suspension (however it still has 1/2 ton axles), 12/24V split electrical system, and a 6.2L Detroit Diesel power plant. I am currently running […]