Ford Model A Information

Here is a list of measurements and other information about the Model “A” Ford:

Engine
Transmission
Cooling System

Electrical
Front Axle
Rear End
Body
Miscellaneous
Model A Owners Manual

*If you have more information you would like to share please comment it below or email me.*

22 Responses to “Ford Model A Information”

  1. Jim says:

    No wear on print does it give length from bumper to door for a get out door in trailer

  2. Thomas B Bentsen says:

    Hei🙂 Har tatt ein kikk på noen av tegningene på siden, og lurer på om målene på tegningene er i CM eller Tommer?

    Mvh: Thomas B.B

  3. Jim Vines says:

    How many 1930 Model A Pickups were made?

  4. This website definitely has all the information and facts I wanted concerning
    this subject and didn’t know who to ask.

  5. click here says:

    Hey, someone in my Facebook mastermind shared this website with me so I
    came to check it out. I’m definitely loving the content, cheers.

  6. Rudie says:

    Hi
    Does anybody know were i can get blue prints for a 32 ford coupe 3 or 5 window
    Thanks

  7. Stephen w Pickney says:

    looking for a 1930 ford coupe title or good frame #

  8. Guillermo says:

    One other question… What were the options offered on a 2 door sedan_

  9. Guillermo says:

    Have a possible buy but am interested in the actual model description…
    2 dr, Luggage Rack, Landau Top, 1930 Right Steering Column
    numbers are..
    M132357
    AF3077684
    Hope this will help as I need to make a decision soon….
    Also… Values.. British vs US manufactured model A (different steering side)

  10. […] Model A Ford Reference Sheet, Owners Manual, and Help […]

  11. Mike V. says:

    Has he found it yet?

  12. fer says:

    me podrian decir en que unidad estan las medidas de los croquis o cuerpos

  13. Bob Gessell says:

    I need to know how to tune a ford model A ford roadster. The main problem we are having right now is where is the distributor suppose to be in relationship to the air intake valve. Should it be sparking as the valve is just closing, 1/2 way closed, or fully open? Any advice or where to get advice would be appreciated.

  14. steve says:

    another question, If I was to convert to 12 volt, do I need to do anything to the starter or will it run on 12 volts without burning up?

  15. steve says:

    Howdy, I have a new radiator shell and new ford emblum (both aftermarket) How do you install the emblum in the shell? Steve

  16. Randy says:

    I will be surfing this for info..and if you need the measurements for thet 28 Tudor wood I have my top off at this moment and could measure what ever you need..let me know

  17. Pete Holmes says:

    Great sight. It has provided me a lot if information. Thank You!
    I am looking for top wood specifications for a 1928 tudor. I have the equipment to make them but can not find any measurements and mine are missing so I can not copy them. If you can steer me in the right direction I would appreciate it Thanks.

    • miles says:

      I don’t have them on hand, but I have a friend who says he has a book with the specifications. So I will get back to you tomorrow. In the mean time you may want to look at http://www.jalopyjournal.com/forum/ or http://www.mafca.com/

      Glad to hear you like the site.

      Thanks,
      Miles

      • miles says:

        My friend can’t locate his book at the moment but he said he was going to look for it and post the dimensions as soon as he finds it. I think if you post your question in the Jalopy Journal you may have better luck. You could also locate your local chapter of the Model A Ford Club Of America. There may be a member with a tudor you could measure.

        Hope this helps,
        Miles

Leave a Reply